The construction industries leading e-magazine -
Contractors World
a free online digital publication for
construction, demolition, mining and quarrying industries

Construction News - Products

Tandem Tilt-Bed Trailed from Humbaur

Trailer manufacturer, Humbaur, is extending its range of professional trailers with the SENKO product development. The tandem tilt-bed trailer is designed specially for the transport of machines with low ground clearance. All vehicle components are designed for heavy-duty use.

The new trailer is designed to provide the highest levels of stability and durability. Made from bolted, three millimetre thick, steel plate, it has the strength to cope with the hardest of challenges. Hot-dip galvanised components ensure a rust-free service life.

The hydraulically lowering axles and the metre long access ramp help with machines having a low ground clearance to load almost at ground level. Safety is provided by a non-slip special hole pattern and ten lashing rings integrated in the flooring framework.

Available in two box dimension – 3.55 x 1.66 and 4.00 x 1.91 metres. Its payload varies from 1.5 to 2.6 tons, depending on the model.

Click here for more information >>> Humbaur SENKO Trailers

Two Tier 4i generators from Multiquip

Multiquip in the USA has just launched the DCA40SSKU4i and the DCA150SSCU4i, Interim Tier IV compliant generators at POWER-GEN International.

The emissions of the DCA40SSKU4i generator’s 49-hp engine are such that they do not require registrations in California with the Air Resources Boards. The unit is equipped with a 49-hp Kubota (V3300-E3BG) diesel engine providing 37 KVA three-phase prime outputs at 240V or 480V while producing only 65 dB(A) at 23 feet. The generator offers 10 hours of run time at full load or 30 hours with an optional trailer and 52 gallon fuel cell.

This model is well inside the Federal Environmental Protection Agency (EPA) Tier 4i mandated emissions standards. The unit is equipped with a diesel particulate filter (DPF) to trap particulate matter from the diesel engine exhaust, producing zero grams per brake horsepower-hour (gr/bhp-hr).

The self-cleaning design uses a regeneration process, manual or automatic, to burn off accumulated soot once it reaches its factory set limit. The manual option allows the operator to select the best time to begin regeneration. Visual indicators in the control panel alert the operator of the regeneration need or progress and it also displays diagnostic troubleshooting guides which allow the user to identify and correct errors.

The generator control panel is designed for operator convenience and ease of operation. The panel is equipped with both analog and digital controls. Analog displays provide quick readings of key performance areas such as engine oil pressure, water temperature, battery charging, fuel level and engine RPM, while digital displays provide clear readouts of engine and DPF performance.

Click here for more information >>> Multiquip Generators

READ OUR OTHER MAGAZINES

Contractors World - UK & Ireland Edition
up-to-date information on news, plant and equipment in the UK & Ireland.
CLICK HERE

CP&E Contractors
Plant & Equipment
up-to-date information on new plant and equipment.
CLICK HERE

Australia News

Online Buyers Guide of Construction, Quarrying & Mining Suppliers

Support the Lighthouse Club Benevolent Fund by sponsoring virtual trees

CONTRACTORS WORLD MAGAZINES
CML House
7 Bell Mead
Sawbridgeworth
Herts CM21 9ES
UK
Tel: +44 1279 600598
Email: infodesk@cwmags.com
URL: http://www.cwmags.com

Contractors World is many magazines in one - construction news for latest information (read our daily news pages) and a site equipment magazine featuring site reports from around the world and reviews of construction plant and equipment as it is introduced.

Written specifically for earthmovers, quarry management, plant hire executives, and others with an interest in the construction and related industries.